Storage
Reference: cold chain, ambient shipping and what degrades
13 November 2026 · 5 min read
A parcel that arrives warm worries people, and the worry is reasonable in a laboratory that is used to a cold chain for biological material. For a sealed lyophilised peptide it is usually misplaced. This note explains why the two cases differ, what actually degrades a peptide reagent, and what is worth doing in the first hour after a delivery.
Why a lyophilised solid travels at ambient temperature
Shipping a solid at ambient temperature is standard practice across the reagent trade, and it rests on one fact: the principal routes by which a peptide degrades need liquid water to proceed. Lyophilisation removes that water. A sealed, dry solid is a far more stable object than the solution made from it, and stable in a way that does not depend on the courier.
A cold chain is not free either. Dry ice or gel packs add mass, add a failure mode of their own, and above all add a deadline: if the coolant is exhausted in a customs queue, the material spends the rest of the journey warming from a cold start, which is a thermal cycle rather than the steady ambient exposure it would otherwise have had.
Solutions are a different object. Once a peptide is in water, the chemistry that lyophilisation suppressed is available again, and the temperature of transit starts to matter in the way people expect. That is one reason reagents are supplied as a solid and reconstituted at the bench. Our shipping page states how orders are packed and dispatched.
What actually drives degradation
Temperature is the variable everyone watches, but on its own it is rarely the one that does the damage. The usual drivers, in roughly the order they cause trouble at the bench:
| Driver | How it acts | Where it bites |
|---|---|---|
| Water | enables hydrolysis and lets a hygroscopic solid cake | an opened vial, a humid room, a poor seal |
| Oxygen | oxidation of susceptible residues | headspace admitted at each entry, a solution left standing |
| Light | photochemical change in sensitive structures | clear glass on an open bench, a sunlit windowsill |
| Thermal cycling | repeated warming and cooling, repeated freeze thaw | a frost free freezer, a vial thawed many times |
| pH | catalyses hydrolysis away from the stable range | an unbuffered or badly chosen solvent |
| Surfaces | adsorption onto plastic and glass | dilute solutions, small volumes, foam from vortexing |
Two things follow from the table. Several of these are admitted by the operator rather than the courier: every entry into a vial introduces air and moisture. And they compound. Water plus warmth plus repeated cycling is far worse than any one alone, which is why a dry sealed solid survives conditions that would ruin a solution.
What a few days at ambient does, and does not do
For a sealed lyophilised solid, a few days in transit at ordinary ambient temperatures is a routine exposure that the format is designed for. The material is dry, the vial is closed, and no cycling of consequence has occurred.
What a transit genuinely can do is physical rather than chemical, and it is visible:
- The lyophilised cake can break up or shift. A loose cake, powder at the base, or material clinging to the stopper are mechanical effects of handling, not evidence of degradation, and the mass in the vial is unchanged.
- A seal can be damaged. A lifted stopper, a cracked vial, a broken flip cap or a lost vacuum is a genuine fault, because it ends the protection the format depends on.
- A liquid product can freeze in winter or be heated in a vehicle in summer. Solvents are more exposed to this than solids.
What a few warm days does not do is turn a sealed, dry solid into a different substance. Judge the parcel on the container and the documentation, not on how warm the cardboard felt.
On arrival
- Open the outer box the day it arrives, even if the work is scheduled for next week. A fault found now can be reported; a fault found in a month cannot be placed.
- Check each vial against the packing list: substance, quantity, lot identifier, and that the documentation matches what is in your hand.
- Inspect the closure. Look for a lifted stopper, a cracked vial, a missing cap, damp inside the packaging, or liquid where there should be none.
- Photograph anything that looks wrong before unpacking further, with the outer packaging still in shot.
- Move the material to its storage zone: the zone its documentation specifies, not the coldest available one by reflex.
- Record the arrival date next to the lot identifier. It is easy to capture now and impossible to reconstruct later.
- Do not open a cold vial straight away. Let it reach room temperature while still closed, so that water does not condense on the contents.
If something arrives damaged, keep the packaging and get in touch rather than working around it. Common questions about dispatch, documentation and storage on arrival are answered in the FAQ.
What goes wrong
- A parcel sits unopened for a fortnight and a transit fault becomes untraceable.
- A sealed solid is put straight into a frost free freezer, which cycles it daily for months.
- A cold vial is opened immediately and the contents collect condensation.
- Arrival date and lot identifier are never written down together, so a later query has nothing to anchor it.